Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools

Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools
Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools
Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools
Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools

Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools

New Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools. Smallest mini Rotary Table for Milling operation with Table Diameter - 2.75 Inches (72 mm). Height when lay Horizontal :1.5 Inches (39 mm). Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees.

Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists. 3 Regular 3 Slots and 4 Slots (80 mm). Quality Low Profile Small Rotary Table diameter 80 mm (3Inches), Table is graduated 360 Degrees.

Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Horizontal Center Height when lay flat : 44 mm. Center Height in vertical position is 45 mm approx. Can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero.

Base Dimensions: 110 x 85 mm II 2 x U slots for clamping: 8 mm. 3 Tilting 3 Slots and 4 Slots (80 mm). Table is graduated 360 Degrees. Can be clamped vertically and horizontally both ways.

Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm). Center Height in vertical position: 2-17/32 (61.5 mm approx).

Can be clamped both Horizontally and Vertically. Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. 4 Regular 3 Slots and 4 Slots (100 mm).

Height when laid horizontally 2-5/16 Inches (58 mm). Center Height in vertical position: 2-1/8 (53.5 mm approx). Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground.

The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play.

The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear.

Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. 4 Tilting 3 Slots and 4 Slots (100 mm). Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx).

Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary's handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life.

Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. HV6-3 Slots (6-150 mm) Tilting. Quality precision 6 Inch /150 mm table diameter HV6 Tilting Horizontal & Vertical Rotary Table, calibrated to tilt and set at any working angle between 0-90° degrees.

Dis-engage-able hand wheel for free table rotation. Lubrication points to worm and table rotation. Micro collar graduated in steps of 1 min. One rotation of the hand-wheel rotates the table 4 degrees.

Centre height in vertical position : 112 mm Centre bore : 2MT Worm gear ratio : 1:90. Remarkable Quality: Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistance.

HV6 (6 Inch -150 mm) 3 Slots. Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks.

Precision ground chuck and overall smooth surface. Gear Ratio 90:1, which mean 1 handle rotation will move the table by 4 Degrees. Table is graduated 360 degree around its circumference. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Centre Height in Vertical Position: 105 mm. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds.

Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.

This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut. 2 x clamps Bolt length: 55 mm overall & Bolt. This will fit both the Horizontal & Tilting model of our 3" (80 mm) & 4" (100 mm) Rotary - 4 Slots Table. (ER Collet Adapter -16 and 20). QUALITY PRECISION UNDER 5 MICRONS ACCURACY- ER16 COLLET ADAPTOR FOR SMALL MILLING ROTARY TABLES.

DESIGNS TO FIT OUR 3" (80 MM) & 4" (100 MM) ROTARY TABLES. SUPPLIED WITH FIXING T NUTS. EPOXY BLACK FINISH FOR A RUST FREE LIFE. THE BASE PLATE OF THIS ADAPTOR IS SUCH THAT IT WILL FIT TO A 3 AS WELL AS 4 SLOT ROTARY TABLE. THE OTHER SIDE OF THE BASE PLATE HAS A LOCATING SPIGOT OF 13.9 MM DIAMETER THAT SITS IN THE CENTER OF ROTARY TABLE, THUS NO NEED TO CENTER IT. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables". The seller is "tools4every1" and is located in this country: IN. This item can be shipped worldwide.
Quality Rotary Table Milling Machine Tools Work holding Tool holding Lathe Tools


Index  Sitemap  Contact Form  Privacy Policies  Service Agreement